The Features of

Ampulab is evacuated blood collection system that qualified CE mark through strict manufacturing process and quality control, so basically, you can get reliable result in hormone, TDM, Latex analysis as well as clinical chemistry, hematology and immunology analysis.

• You can have very dependable result with Ampulab that has size and material that NCCLS recommends.
• You can use in any clinical experiment conveniently with all kind of blood collection tube for any clinical analysis.
• Ampulab is manufactured for easy work by marking the exact blood quantity on tube label.
• Improved process helps Ampulab for the best vacuum state and additives quantity.
• We minimize any variation during manufacturing by the automation of all process.
• Safety cap helps you from any infection and contamination during blood collection.
• The unbreakable plastic tube of PET material helps your safety for collecting, carrying, storing blood.
• Double Layer tube provides more accurate data.(Coagulation tube)
• We have own gamma sterilization facility FDA certified.
• Ampulab's tube dimension is optimized for all instrument including TLA system.
• Ampulab has a compact package for delivery and storage.

SSGT(Serum Separation Gel Tube) User Manual

STEP 01

Draw blood as specified volume

STEP 02

After drawing blood into tubes, surely make tubes inversion at least 8~10 times for good reaction of blood and clot activator.

STEP 03

After inversion, keep tubes on the rack at least 30 min for clotting

STEP 04

Keep centrifugation speed 1,800~2,000 RCF(G) for 10 min

STEP 05

After centrifugation, the horizontal gel-barrier is the best for data

How to Use

STEP 01

Prepare all material for blood collection, and decap multi-needle.

STEP 02

Fix multi-needle to the holder

STEP 03

Select a site for venipuncture and clean it with the alcohol swab to keep sterile. After drying alcohol, hold the needle with its slanting surface of skin.

STEP 04

During injection, inject a tube on the other side of multi-needle. The patient’s arm should be downward at this time and release tourniquet while flowing blood.

STEP 05

Finishing blood collection for one tube, remove the tube and put other tube into multi-needle. The holder and multi-needle should be fixed at this time.

STEP 06

Remove multi-needle from skin when finishing blood collection work, and stop bleeding with alcohol swab.

Caution in Use

Before Use

• You should not fasten tourniquet too tightly (about 100mmHg), and don't collect blood when fastening tourniquet more than 1 min.
• Deinfect the venipuncture part with alcohol swab, and inject after drying the skin.
• The elbow should be placed on cushion, and headed downward.

In Use

• During vein injection, hold needle 10-20 degree above the skin, and be careful not to penetrate the wall of vein.
• When replacing the tube, fix it with one hand not to move the needle.
• During blood collection, be careful not to touch additives to tube cap or multi-needle.
• When removing needle from vein, be careful not to hurt it, and cover alcohol swab against blood contamination.

After Use

• All tubes that have blood afer collection should be shaked about 8 times up and down. (Coagulation tube is 4 times)
• Every tube should be applied to proper centrifugation.
• Be careful about hemolysis.

The Procedure of Blood Collection

Use from non-additives tube.

• 01No Additive
• 02Coagulation
• 03Serum(Gel)
• 04Heparin(Gel)
• 05EDTA
• 06Glucose
• 07The others

Color Chart

Color	Total Volume(ml)	1	1.6	1.8	2	2.4	2.7	3	3.5	3.6	4	4.5	5	6	8	8.5	10	Additives
	Tube size(mm)	13*75	13*75	13*75	13*75	13*75	13*75	13*75	13*75	13*75	13*100	13*100	13*100	13*100	16*100	16*100	16*100
	Serum										○			○			○	Clot activator
	Serum(Gel)								○				○			○		Clot activator + Separation Gel
	Haematology	○			○			○			○			○			○	K3EDTA / K2EDTA
	Coagulation			○			○			○		○						Trisodium Citrate 0.129M 9:1, 3.8% / Trisodium Citrate 0.109M 9:1 3.2%
	Plasma										○			○			○	Lithium Heparin, Sodium Heparin
	Plasma(Gel)								○			○			○			Lithium Heparin + Separation Gel
	Glucose							○										Sodium Fluoride + Potassium oxalate
	ESR		○			○												Trisodium Citrate 0.129M 4:1, 3.8%
	ESGT								○				○			○		K2 EDTA with Gel

Centrifugation for tube type

※ Centrifuge can be influential the component of gel barrier. Swing-out rotor centrifuge instrument can work more gel barrier.
Gel barrier work should be at room temperature (15.24C).

Troubleshooting Guide

IF AN INCOMPLETE COLLECTION OR NO BLOOD IS OBTAINED

• Change the position of the needle. Move it forward it may not be in the lumen).
• or move it backward (it may have penetrated too far).
• Adjust the angle (the bevel may be against the vein wall).
• Loosen the tourniquet. It may be obstructing blood flow.
• Try another tube. There may be no vacuum in the one being used.
• Re-anchor the vein. Veins sometimes roll away from the point of the needle and puncture site.

IF BLOOD STOPS FLOWING INTO THE TUBE

• The vein may have collapsed; resecure the tourniquet to increase venous filling. If this is not successful, remove the this is not successful, remove the needle, take care of the puncture site, and redraw.
• The needle may have pulled out of the vein when switching tubes. Hold equipment firmly and place fingers against patient's arm, using the flange for leverage when withdrawing and inserting tubes.

PROBLEMS OTHER THAN AN INCOMPLETE COLLECTION

• A hematoma forms under the skin adjacent to the puncture site - release the tourniquet immediately and withdraw theneedle. Apply firm pressure.
• Hematoma formation is a problem in older patients.
• The blood is bright red (arterial) rather than venous. Apply firm pressure for more than 5 minutes.

We, Soyagreentec Co., Ltd. , acquired ISO9001, ISO13485 and CE certificate through the thorough quality control process and inspection.